7 49
Maintenance
1
2
3
4
5
6
7
8
9
Rear combination light bulb
replacement
1. Press the lock tabs on the cover
with your fingers and remove the
cover.
2. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
3. Remove the bulb from the socket
by pressing it in and rotating it until
the tabs on the bulb align with the
slots in the socket. Pull the bulb
out of the socket.
4. Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
5. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
6. Install the cover.
➀
Rear turn signal light
➁
Stop and tail light
➂
Rear fog light or Back-up light (For europe)
- LH side : Fog light
- RH side : Back-up light
➂
Back-up light (Except europe)
1PUA5034
Summary of Contents for K2500 2007
Page 4: ...1 2 3 4 5 6 7 8 9 How to use this manual 1 2 Vehicle break in process 1 3 Introduction...
Page 7: ...1 2 3 4 5 6 7 8 9 Exterior overview 2 2 Interior overview 2 3 Your vehicle at a glance...
Page 206: ...1 2 3 4 5 6 7 8 9 Specifications 8 2 Specifications...
Page 212: ...1 2 3 4 5 6 7 8 9 Index...