SEATING
Driver Position Memory System
The integrated system stores into memory the position of
the driver’s seat, outside rearview mirrors, and steering
wheel positions. To store positions into memory, first place
the gear shift into P (Park) while the Engine Start/Stop
button is in the ON position. Then:
1. Adjust the driver’s seat, outside rearview mirrors,
settings and steering wheel positions
2. Press the SET button
B
on the control panel. System
will beep once
3. Press one of the memory buttons 1, 2 or 3
C
within
4 seconds. The system will beep twice when memory
has been stored
1
2
3
1
2
3
(Located on driver’s door control panel)
(Located on side of seat cushion)
REMINDER:
Do not operate
the vehicle with the headrests
removed. Headrests can
provide critical neck and head
support in an accident.
REMINDER:
Do not attempt to operate the driver position memory
system while the vehicle is moving. This could result in loss of control of
the vehicle.
Power Front Seat Headrest Adjustment
†10
Use the switch
A
to adjust the Power Headrest forward/backward
and up/down.
46
†LEGAL DISCLAIMERS ON BACK INSIDE COVER
A
B
C