Kia K 900 2015, Owner'S Manual, Page: 222 / 512

Features of your vehicle
4-142
• For maximum defrosting, set the
temperature control to the extreme
right/hot position and the fan speed
control to the highest speed.
• If warm air to the floor is desired
while defrosting or defogging, set
the mode to the floor-defrost posi-
tion.
• Before driving, clear all snow and
ice from the windshield, rear win-
dow, outside rear view mirrors, and
all side windows.
• Clear all snow and ice from the
hood and air inlet in the cowl grill to
improve heater and defroster effi-
ciency and to reduce the probabili-
ty of fogging up the inside of the
windshield.
To defog inside windshield
1.Set the fan speed to the desired
position.
2.Select desired temperature.
3.Press the defrost button (
).
4.The air conditioning will be turned
on according to the detected ambi-
ent temperature and outside (fresh)
air position will be selected auto-
matically.
OKH043225N
WINDSHIELD DEFROSTING AND DEFOGGING
Windshield heating
Do not use the or posi-
tion during cooling operation in
extremely humid weather. The
difference between the temper-
ature of the outside air and that
of the windshield could cause
the outer surface of the wind-
shield to fog up, causing loss of
visibility. In this case, set the
mode selection knob or button
to the
position and fan
speed control knob or button to
the lower speed.
WARNING
KH USA 4:TD usa 4(~86).qxd 1/21/2014 4:05 PM Page 142