Kia FORTE 2022 Manual Download Page 481

Page: 481 / 514

Maintenance

Light bulbs

depressed to avoid burning your fingers
or receiving an electric shock.

1. Using a flat-blade screwdriver, gently

pry the lamp assembly from interior.

2. Remove the bulb by pulling it straight

out.

3. Install a new bulb in the socket.
4. Install the lamp assembly to interior.

CAUTION

Be careful not to dirty or damage the
lens, lens tab, and plastic housings.

Liftgate room lamp (Bulb type)
bulb replacement

1. Open the liftgate.
2. Remove the lamp assembly by using

a flat-blade screwdriver.

3. Remove the cover from the lamp

assembly.

4. Remove the bulb by pulling it straight

out.

5. Install a new bulb in the socket.
6. Install the cover to the lamp assembly.
7. Install the lamp assembly to the body

of the vehicle.

CAUTION

Be careful not to dirty or damage the
lens, lens tab, and plastic housings.

Glove box lamp (Bulb type)
replacement

1. Using a flat-blade screwdriver, gently

pry the lamp assembly from interior.

2. Remove the bulb by pulling it straight

out.

3. Install a new bulb in the socket.
4. Install the lamp assembly to interior.

CAUTION

Be careful not to dirty or damage the
lens, lens tab, and plastic housings.

OBD071222L

OBD071058L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Search results

Summary of Contents for FORTE 2022

Reviews:

Kia FORTE 2022, Manual, Page: 481 / 514

Search results

Summary of Contents for FORTE 2022

Reviews: