manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 405 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 405

31

6

6

What to do in an emergency

Towing

or tire dealer or in accordance with 
local waste disposal regulations.

Towing

Towing service

If emergency towing is necessary, we 
recommend having it done by an autho

-

rized Kia dealer or a commercial tow-
truck service. Proper lifting and towing 
procedures are necessary to prevent 
damage to the vehicle. The use of wheel 
dollies (1) or flatbed is recommended.
It is acceptable to tow the vehicle with 
the rear wheels on the ground (without 
dollies) and the front wheels off the 
ground.

If any of the loaded wheels or suspen

-

sion components are damaged or the 
vehicle is being towed with the front 
wheels on the ground, use a towing dolly 
under the front wheels.
When being towed by a commercial tow 
truck and wheel dollies are not used, the 
front of the vehicle should always be 
lifted, not the rear.

NOTICE

If the Electronic Parking Brake (EPB) 
does not release normally, take your 
vehicle to an authorized Kia dealer by 

OBD061011

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments