manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 325 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 325

115

5

5

Driving your vehicle

Navigation-based Smart Cruise Control (NSCC)

Always look out for pedestrian when 
your vehicle is maintaining a distance 
with the vehicle ahead.

This device complies with Indus

-

try Canada licence-exempt RSS 
standard(s).

Operation is subject to the following 
conditions:
1. This device may not cause interfer

-

ence, and

2. This device must accept any interfer

-

ence, including interference that may 
cause undesired operation of the 
device.

3. Changes or modifications not 

expressly approved by the party 
responsible for compliance could void 
the user's authority to operate the 
device. 

Navigation-based Smart 
Cruise Control (NSCC) (if 
equipped)

Navigation-based Smart Cruise Control 
can help drive at a certain speed accord

-

ing to the road conditions when driving 
on highways (or motorways) by using 
road information from the navigation 
system while Smart Cruise Control is 
operating.

NOTICE

僅 Navigation-based Smart Cruise Con

-

trol is available only on controlled 
access road of certain highways.
* Controlled access road indicates 

roads with limited entrances and 
exits that allow uninterrupted high 
speed traffic flow. Only passenger 
cars and motorcycles are allowed on 
controlled access roads.

僅 Additional highways may be 

expanded by future navigation 
updates.

NOTICE

Navigation-based Smart Cruise Control 
operates on main roads of highways (or 
motorways), and does not operate on 
interchanges or junctions.

OCK050271

Available highway

(Controlled access road)

USA

Select Interstate 
Highway and U.S. 
(Federal) and 
State Highways

Canada

Select Provincial 
and Territorial 
Highways

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments