manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 289 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 289

79

5

5

Driving your vehicle

Blind-Spot Collision-Avoidance Assist (BCA)

Blind-Spot Collision-Avoid

-

ance Assist (BCA)

Blind-Spot Collision-Avoidance Assist is 
designed to help detect and monitor 
approaching vehicles in the driver’s 
blind spot area and warn the driver of a 
possible collision with a warning mes

-

sage and audible warning.
In addition, if there is a risk of collision 
when changing lanes or driving forward 
out of a parking space, Blind-Spot Colli

-

sion-Avoidance Assist can help avoid 
collision by applying the differential 
braking.

Blind-Spot Collision-Avoidance Assist 
helps detect and informs the driver that 
a vehicle is in the blind spot.

CAUTION

The detecting range may vary depend

-

ing on the speed of your vehicle. Even if 
there is a vehicle in the blind spot area, 
Blind-Spot Collision-Avoidance Assist 
may not warn you when you pass by at 
high speeds.

Blind-Spot Collision-Avoidance Assist 
helps detect and informs the driver that 
a vehicle is approaching at high speed 
from the blind spot area.

CAUTION

Warning Timing may vary depending on 
the speed of the vehicle approaching at 
high speed.

When you are driving forward out of a 
parking space, if Blind-Spot Collision-
Avoidance Assist judges that there is a 
collision risk with an approaching vehicle 
in the blind spot, it can help avoid colli

-

sions by applying the brake.

ODL3A050063

ODL3059062

OBD051361

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments