manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 261 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 261

51

5

5

Driving your vehicle

Forward Collision–Avoidance Assist (FCA) (Front view camera

only)

CAUTION

Take the following precautions to main

-

tain optimal performance of the detect

-

ing sensor:
僅 Never disassemble the detecting sen

-

sor or sensor assembly, or cause any 
damage to it.

僅 If the detecting sensor has been 

replaced or repaired, have your vehi

-

cle inspected by an authorized Kia 
dealer.

僅 Never install any accessories or stick

-

ers on the front windshield, or tint the 
front windshield.

僅 Pay extreme caution to keep the front 

view camera dry.

僅 Never place any reflective objects (for 

example, white paper, mirror) over the 
dashboard.

Forward Collision-Avoidance 
Assist Settings

Setting features

Forward Safety

With the ignition switch or ENGINE 
START/STOP button in the ON position, 
select 'Driver Assistance → Forward 
Safety' from the 'User Settings (LCD dis

-

play) or Setup → Vehicle (Infotainment 

System screen)' menu to set whether to 
use each function.
僅 If 'Active Assist' is selected, Forward 

Collision-Avoidance Assist will warn 
the driver with a warning message 
and an audible warning depending on 
the collision risk levels. Braking assist 
may be applied depending on the col

-

lision risk levels. Braking assist will be 
applied depending on the collision 
risk.

僅 If 'Warning Only' is selected, Forward 

Collision-Avoidance Assist will warn 
the driver with a warning message 
and an audible warning depending on 
the collision risk levels. Braking will 
not be assisted. The driver must apply 
the brake pedal if necessary.

僅 If 'Off' is selected, Forward Collision-

Avoidance Assist will be turned off. 

The 

 warning light will illuminate 

on the cluster.

The driver can monitor Forward Colli

-

sion-Avoidance Assist On/Off status 

from the settings menu. If the 

 

warning light remains on when Forward 
Collision-Avoidance Assist is on, have 
the vehicle inspected by an authorized 
Kia dealer.

WARNING

僅 When the engine is restarted, Forward 

Collision-Avoidance Assist will always 
turn on.

僅 If 'Off' is selected from the settings 

menu, the Forward Collision-Avoid

-

ance Assist will not operate so the 
driver should always be aware of the 
surroundings and drive safely.

OMQ4AH050344

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments