manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 251 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 251

41

5

5

Driving your vehicle

Brake system

ing will sound and a message will 
appear.

When you press the Auto Hold button, if 
the driver's door, liftgate, and engine 
hood are not closed, a warning will 
sound and a message will appear on the 
LCD display.

At this moment, press the Auto Hold but

-

ton after closing the driver’s door, 
engine hood and liftgate.

Anti-lock brake system (ABS)

WARNING

ABS (or ESC) will not prevent accidents 
due to improper or dangerous driving 
maneuvers. Even though vehicle control 
is improved during emergency braking, 
always maintain a safe distance 
between you and objects ahead. Vehicle 

speeds should always be reduced during 
extreme road conditions.
The braking distance for cars equipped 
with an anti-lock braking system (or 
Electronic Stability Control system) may 
be longer than for those without it in the 
following road conditions.
During these conditions the vehicle 
should be driven at reduced speeds:
僅 Rough, gravel or snow-covered roads.
僅 On roads where the road surface is 

pitted or has different surface height.

The safety features of an ABS (or ESC) 
equipped vehicle should not be tested 
by high speed driving or cornering. This 
could endanger the safety of yourself or 
others.

The ABS continuously senses the speed 
of the wheels. If the wheels are going to 
lock, the ABS system repeatedly modu

-

lates the hydraulic brake pressure to the 
wheels.
When you apply your brakes under con

-

ditions which may lock the wheels, you 
may hear a “tik-tik’’ sound from the 
brakes, or feel a corresponding sensa

-

tion in the brake pedal. This is normal 
and it means your ABS is active.
In order to obtain the maximum benefit 
from your ABS in an emergency situa

-

tion, do not attempt to modulate your 
brake pressure and do not try to pump 
your brakes. Depress your brake pedal 
as hard as possible or as hard as the sit

-

uation warrants and allow the ABS to 
control the force being delivered to the 
brakes.

NOTICE

A click sound may be heard in the 
engine compartment when the vehicle 
begins to move after the engine is 

OBD041229L

OMQ4AH050057

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments