manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 236 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 236

Driving your vehicle

26

5

Intelligent Variable Transmission (IVT)

and affecting the braking perfor

-

mance.

僅 Always buckle-up! In a collision, an 

unbelted occupant is significantly 
more likely to be seriously injured or 
killed than a properly belted occu

-

pant.

僅 Avoid high speeds when cornering or 

turning.

僅 Do not make quick steering wheel 

movements, such as sharp lane 
changes or fast, sharp turns.

僅 The risk of rollover is greatly 

increased if you lose control of your 
vehicle at highway speeds.

僅 Loss of control often occurs if two or 

more wheels drop off the roadway 
and the driver oversteers to reenter 
the roadway.

僅 In the event your vehicle leaves the 

roadway, do not steer sharply. 
Instead, slow down before pulling 
back into the travel lanes.

僅 Never exceed posted speed limits.

WARNING

If your vehicle becomes stuck in snow, 
mud, sand, etc., then you may attempt 
to rock the vehicle free by moving it for

-

ward and backward. Do not attempt this 
procedure if people or objects are any

-

where near the vehicle. During the rock

-

ing operation the vehicle may suddenly 
move forward or backward as it 
becomes unstuck, causing injury or 
damage to nearby people or objects.

Intelligent Variable Transmis

-

sion (IVT) (if equipped)

The Intelligent Variable Transmission 
(IVT) automatically shifts depending on 
speed, accelerate pedal position. The 
individual speeds are selected automati

-

cally, depending on the position of the 
shift lever.

 Depress the brake pedal and the 

lock release button when shifting.

 Press the lock release button when 

shifting.

 The shift lever can be shifted 

freely.

Intelligent Variable Transmission 
(IVT) operation

For smooth operation, depress the brake 
pedal when shifting from N (Neutral) to 
a forward or reverse gear.

WARNING

Intelligent Variable Transmission (IVT)

僅 Always check the surrounding areas 

near your vehicle for people, espe

-

cially children, before shifting a car 
into D (Drive) or R (Reverse).

僅 Before leaving the driver's seat, 

always make sure the shift lever is in 
the P (Park) position; then set the 

OBD051005

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments