manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 167 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 167

91

4

4

Features of your vehicle

Wipers and washers

do not remove or damage related 
parts the function.

僅 Do not place objects on the crash pad 

that reflect light such as mirrors, white 
paper, etc. The function may malfunc

-

tion if sunlight is reflected.

僅 At times, High Beam Assist may not 

work properly. The function is for your 
convenience only. It is the responsibil

-

ity of the driver for safe driving prac

-

tices and always check the road 
conditions for your safety.

僅 When the function does not operate 

normally, change the lamp position 
manually between the high beam and 
low beam.

Wipers and washers

The wipers and washers remove foreign 
substances from the windshield and rear 
window, helping to maintain visibility.

Front

A: Wiper speed control (front)

1. MIST : Single wipe
2. OFF : Off
3. INT : Intermittent wipe
4. LO : Low wiper speed
5. HI : High wiper speed

B: Intermittent control wipe time 
adjustment/Auto control wipe time 
adjustment
C: Wash with brief wipes (front)

NOTICE

If there is heavy accumulation of snow 
or ice on the windshield, defrost the 
windshield for about 10 minutes, or until 
the snow and/or ice is removed before 
using the windshield wipers to ensure 
proper operation. If you do not remove 
the snow and/or ice before using the 
wiper and washer, it may damage the 
wiper and washer system.

OBD041096L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments