manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 161 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 161

85

4

4

Features of your vehicle

Lighting

tion when it is dark outside, the head

-

lamps will not be turned off.
You can activate or deactivate the Head

-

lamp Delay function from the User Set

-

tings Mode in the LCD display. For more 
details, refer to "LCD display" on page 4-
56. If your vehicle is equipped with addi

-

tional navigation, please refer to the 
infotainment system manual separately 
supplied.

NOTICE

If the driver exits the vehicle through 
another door besides the driver door, 
the battery saver function does not 
operate and the headlamp delay func

-

tion does not turn OFF automatically.
This may cause the battery to discharge. 
To avoid battery discharge, turn OFF the 
headlamps manually from the headlamp 
switch before exiting the vehicle.

Headlight welcome function (if 
equipped)

When the headlight switch is in the ON 
or AUTO position and all doors (and lift

-

gate) are closed and locked, if you press 
the door unlock button on the transmit

-

ter (or smart key), the headlights will 
come on for about 15 seconds.If the 
headlight switch is in the AUTO position, 
the function can only operate at night.At 
this time, if you press the door unlock 
button again or door lock button on the 
transmitter (or smart key), the head

-

lights will turn off immediately.

Daytime Running Light (DRL)

The Daytime Running Light (DRL) can 
make it easier for others to see the front 
of your vehicle during the day.
The DRL can be helpful in many differ

-

ent driving conditions, and it is especially 
helpful after dawn and before sunset.
The DRL will turn the dedicated lamp 
OFF when:
僅 The headlight switch is on.
僅 The vehicle is off.
僅 The front fog light is on. (if equipped)
僅 The parking brake is engaged.

Off position

The parking light and headlight will be 
turn ON or OFF automatically depending 
on the amount of daylight as measured 
by the ambient light sensor on the cen

-

ter dash when the parking brake is not 
engaged and shift lever is not in P(Park). 
The parking light and headlight will be 
turned OFF when the vehicle speed is 
less than 5 km/h and parking brake is 
engaged or shift lever is in P(Park).

ODEEV061132CF

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments