manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 123 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 123

47

4

4

Features of your vehicle

Mirrors

Mirrors

This vehicle is equipped with inside and 
outside rear view mirrors to provide 
views of objects behind the vehicle.

Inside rear view mirror

Adjust the rear view mirror so that the 
center view through the rear window is 
seen.
Make this adjustment before you start 
driving.
Do not place objects in the rear seat or 
cargo area which would interfere with 
your vision out the rear window.

WARNING

Mirror adjustment

Do not adjust the rearview mirror while 
the vehicle is moving. This could result in 
loss of control.

WARNING

Do not modify the inside mirror and 
don't install a wide mirror. It could result 
in injury, during an accident or deploy

-

ment of the air bag.

Day/night rear view mirror (if 
equipped)

(A): Day, (B): Night

Make this adjustment before you start 
driving and while the day/night lever (1) 
is in the day position (A).
Pull the day/night lever (1) toward you 
(B) to reduce the glare from the head

-

lights of the vehicles behind you during 
night driving.
Remember that you lose some rear view 
clarity in the night position (B).

Day/night rearview mirror with 
Telematics function (if equipped)

For day and night function:

* (1): Day, (2): Night
Make this adjustment before you start 
driving and while the day/night lever is 
in the day position (1).
Pull the day/night lever toward you (2) to 
reduce the glare from the headlights of 
the vehicles behind you during night 
driving.
Remember that you lose some rearview 
clarity in the night position (2).

OBD041069

OBDM041670

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments