Kia FORTE 2022 Manual Download Page 500

Page: 500 / 514

Specifications, Consumer information
and Reporting safety defects

Tire specification and pressure label

Tire specification and pressure
label

The tires supplied on your new vehicle
are chosen to provide the best perfor

mance for normal driving.
The tire label located on the driver's side
center pillar gives the tire pressures rec

ommended for your vehicle.

Engine number

(Gasoline) 2.0 MPI

(Gasoline) 1.6 T-GDi

The engine number is stamped on the
engine block as shown in the drawing.

OST087008

OBD088001L

OBD088004L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Search results

Summary of Contents for FORTE 2022

Reviews:

Kia FORTE 2022, Manual, Page: 500 / 514

Search results

Summary of Contents for FORTE 2022

Reviews: