manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 480 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 480

Maintenance

70

7

Light bulbs

Room lamp (Bulb type) bulb 
replacement

WARNING

Prior to working on the Interior lamps, 
ensure that the “OFF” button is 
depressed to avoid burning your fingers 
or receiving an electric shock.

1. Using a flat-blade screwdriver, gently 

pry the lens cover from lamp housing.

2. Remove the bulb by pulling it straight 

out.

3. Install a new bulb in the socket.
4. Align the lens cover tabs with the 

lamp housing notches and snap the 
lens into place.

CAUTION

Be careful not to dirty or damage the 
lens, lens tab, and plastic housings.

Room lamp (LED type) bulb 
replacement

If the room lamp (LED) (1), does not 
operate, have the vehicle checked by an 
authorized Kia dealer.
The LED lamps cannot be replaced as a 
single unit because it is an integrated 
unit. The LED lamps has to be replaced 
with the unit.
A skilled technician should check or 
repair the room lamp (LED), for it may 
damage related parts of the vehicle.

Vanity mirror lamp (Bulb type) 
bulb replacement

WARNING

Prior to working on the Interior lamps, 
ensure that the “OFF” button is 

ODEEV098066NR

ODEEV098067NR

OYB070154L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments