manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 474 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 474

Maintenance

64

7

Light bulbs

Position lamp/Daytime running 
lamp (LED type) bulb replace

-

ment

Headlamp Type A

If the position lamp/daytime running 
lamp (LED) (1) does not operate, have 
the vehicle checked by an authorized Kia 
dealer.
The LED lamps cannot be replaced as a 
single unit because it is an integrated 
unit. The LED lamps has to be replaced 
with the unit.
A skilled technician should check or 
repair the position lamp/daytime run

-

ning lamp (LED), for it may damage 
related parts of the vehicle.

Headlamp (LED type) bulb 
replacement

Headlamp Type B

If the Front turn signal lamp (1), High 
beam lamp (2), Low beam lamp (3), Day 
time running lamp/Position lamp(4), side 
marker (5) does not operate, have the 
vehicle checked by an authorized Kia 
dealer.
The LED lamps cannot be replaced as a 
single unit because it is an integrated 
unit. The LED lamps has to be replaced 
with the unit.
A skilled technician should check or 
repair the head lamp (LED), for it may 
damage related parts of the vehicle.

OBDM071312

OBDM071210

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments