manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 460 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 460

Maintenance

50

7

Fuses

NOTICE

Do not disassemble or assemble the 
multi fuse when it is secured with nuts 
and bolts. Incorrect or partial assembly 
torque may cause a fire. Have the vehi

-

cle checked by an authorized Kia dealer.

Battery fuse

If the battery fuse is blown, it must be 
removed as follows:
1. Disconnect the negative battery cable.
2. Remove the nuts shown in the picture 

below.

3. Replace the fuse with a new one of 

the same rating.

4. Reinstall in the reverse order of 

removal.

NOTICE

If the battery fuse is blown, have the 
vehicle checked by an authorized Kia 
dealer.

CAUTION

Visually inspect the battery cap to 
ensure it is securely closed. If the battery 
cap is not securely closed, moisture may 
enter the system and damage the elec

-

trical components.

Fuse/relay panel description

Inside the fuse/relay panel covers, you 
can find the fuse/relay label describing 
fuse/relay name and capacity.

Driver's side fuse panel

NOTICE

Not all fuse panel descriptions in this 
manual may be applicable to your vehi

-

cle. It is accurate at the time of printing. 
When you inspect the fuse panel in your 
vehicle, refer to the fuse panel label on 
the inside of the fuse cover. This dia

-

gram will provide you with the specific 
information for your vehicles.

OBD071022

OBDM071023L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments