manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 456 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 456

Maintenance

46

7

Fuses

Fuses

A vehicle's electrical system is protected 
from electrical overload damage by 
fuses.

Blade type

Cartridge type

Multi fuse

BFT

* Left side: Normal, Right side: Blown
This vehicle has 2 (or 3) fuse panels, one 
located in the driver's side panel bolster, 
the other in the engine compartment 
near the battery.

If any of your vehicle's lights, accesso

-

ries, or controls do not work, check the 
appropriate circuit fuse. If a fuse has 
blown, the element inside the fuse will 
melt.
If the electrical system does not work, 
first check the driver's side fuse panel.
If the replacement fuse blows, this indi

-

cates an electrical problem. Avoid using 
the system involved and immediately 
consult an authorized Kia dealer.
Three kinds of fuses are used: blade 
type for lower amperage rating, car

-

tridge type, and multi fuse for higher 
amperage ratings.

WARNING

Fuse replacement

僅 Never replace a fuse with anything 

but another fuse of the same rating.

僅 A higher capacity fuse could cause 

damage and possibly a fire.

僅 Never install a wire or aluminum foil 

instead of the proper fuse - even as a 
temporary repair. It may cause exten

-

sive wiring damage and a possible 
fire.

僅 Do not arbitrarily modify or add-on 

electric wiring to the vehicle.

CAUTION

Do not use a screwdriver or any other 
metal object to remove fuses because it 
may cause a short circuit and damage 
the system.

NOTICE

僅 When replacing a fuse, Turn the igni

-

tion to the OFF position and turn off 
switches of all electrical devices then 
remove battery (-) terminal.

ODEEV098032NR

ODEEV098077NR

ODEEV098078NR

ODEEV098079NR

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments