Kia FORTE 2022 Manual Download Page 439

Page: 439 / 514

Maintenance

Air cleaner

2. Wipe the inside of the air cleaner.

3. Replace the air cleaner filter.
4. Lock the cover with the cover attach

ing clips.

NOTICE

Insert the hinge(1) and engage the clips
when mounting the air cleaner cover.

Replace the filter according to the Main

tenance Schedule.
If the vehicle is operated in extremely
dusty or sandy areas, replace the ele

ment more often than the usual recom

mended intervals. (Refer to
"Recommended lubricants and capaci

ties" on page 8-7.)

CAUTION

僅 Do not drive with the air cleaner

removed; this will result in excessive
engine wear.

僅 When removing the air cleaner filter,

be careful that dust or dirt does not
enter the air intake, or damage may
result.

僅 Use a Kia genuine part. Use of a non-

genuine part could damage the air
flow sensor.

OBD071011

OBD078068

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Search results

Summary of Contents for FORTE 2022

Reviews:

Kia FORTE 2022, Manual, Page: 439 / 514

Search results

Summary of Contents for FORTE 2022

Reviews: