Kia FORTE 2022 Manual Download Page 437

Page: 437 / 514

Maintenance

Washer fluid

Checking the washer fluid level

The reservoir is translucent so that you
can check the level with a quick visual
inspection.
僅 Check the fluid level in the washer

fluid reservoir and add fluid if neces

sary. Plain water may be used if
washer fluid is not available. However,
use washer solvent with antifreeze
characteristics in cold climates to pre

vent freezing.

WARNING

Flammable Fluid

Do not allow the washer fluid to come in
contact with open flames or sparks. The
windshield washer fluid reservoir is flam

mable under certain circumstances. This
can result in a fire.

WARNING

Coolant

僅 Do not use radiator coolant or anti

freeze in the washer fluid reservoir.

僅 Radiator coolant can severely obscure

visibility when sprayed on the wind

shield and may cause loss of vehicle
control.

WARNING

Windshield fluid

Do not drink the windshield washer fluid.
The windshield washer fluid is poisonous
to humans and animals.

OBD071008

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Search results

Summary of Contents for FORTE 2022

Reviews:

Kia FORTE 2022, Manual, Page: 437 / 514

Search results

Summary of Contents for FORTE 2022

Reviews: