manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 427 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 427

17

7

7

Maintenance

Explanation of scheduled maintenance items

Severe Driving Conditions

A: Repeatedly driving short distance of 
less than 8 km (5 miles) in normal tem

-

perature or less than 16 km (10 miles) in 
freezing temperature.
B: Extensive low speed driving for long 
distances.
C: Driving on rough, dusty, muddy, 
unpaved, graveled or salt-spread roads.
D: Driving in areas using salt or other 
corrosive materials or in very cold 
weather.
E: Driving in heavy dust condition.
F: Driving in heavy traffic area.
G: Driving on uphill, downhill, or moun

-

tain roads.
H: Using for towing or camping and driv

-

ing with loading on the roof
I: Driving as a patrol car, taxi, other com

-

mercial use, or vehicle towing 
J: Frequently driving under high speed 
or rapid acceleration/deceleration.
K: Frequently driving in stop-and-go 
conditions

Explanation of scheduled 
maintenance items

The following parts require scheduled 
maintenance.

Engine oil and filter

The engine oil and filter should be 
changed at the intervals specified in the 
maintenance schedule. If the vehicle is 
being driven in severe conditions, more 
frequent oil and filter changes are 
required.

Drive belts

Inspect all drive belts for evidence of 
cuts, cracks, excessive wear or oil satu

-

ration and replace if necessary. Drive 
belts should be checked periodically for 
proper tension and adjusted as neces

-

sary.

Fuel filter

Kia gasoline vehicles are equipped with 
a lifetime fuel filter that is integrated 
with the fuel tank. Regular maintenance 
or replacement is generally not needed. 
This may vary depending on fuel quality. 
If you experience any of the following: 
fuel flow restriction, surging, loss of 
power, or a hard starting issue, inspec

-

tion and, if necessary, replacement may 
be needed. Have the fuel filter inspected 
or replaced by an authorized Kia dealer.

Fuel lines, fuel hoses and connec

-

tions

Check the fuel lines, fuel hoses and con

-

nections for leakage and damage. Have 
an authorized Kia dealer replace any 
damaged or leaking parts immediately.

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments