Kia FORTE 2022 Manual Download Page 423

Page: 423 / 514

Maintenance

Scheduled maintenance service

Severe driving conditions

僅 A: Repeatedly driving short distance

of less than 8 km (5 miles) in normal
temperature or less than 16 km (10
miles) in freezing temperature.

僅 B: Extensive engine idling or low

speed driving for long distances.

僅 C: Driving on rough, dusty, muddy,

unpaved, graveled or saltspread
roads.

僅 D: Driving in areas using salt or other

corrosive materials or in very cold
weather.

僅 E: Driving in heavy dust condition.
僅 F: Driving in heavy traffic area.
僅 G: Driving on uphill, downhill, or

mountain road repeatedly.

僅 H: Using for towing or camping, and

driving with loading on the roof.

僅 I: Driving as a patrol car, taxi, other

commercial use or vehicle towing.

僅 J: Frequently driving under high

speed or rapid acceleration/decelera

tion.

僅 K: Frequently driving in stop-and-go

conditions

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Search results

Summary of Contents for FORTE 2022

Reviews:

Kia FORTE 2022, Manual, Page: 423 / 514

Search results

Summary of Contents for FORTE 2022

Reviews: