manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 41 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 41

21

3

3

Safety features of your vehicle

Seat belts

matic locking feature to the emergency 
locking operation mode, allow the 
unbuckled seat belt to fully retract.

CAUTION

Do NOT fold down the left portion of the 
rear seatback when the rear center seat 
belt is buckled. ALWAYS UNBUCKLE the 
rear center seat belt before folding down 
the left portion of the rear seatback. If 
the rear center seat belt is buckled when 
the left portion of the rear seatback is 
folded down, distortion and damage to 
the top portion of the seatback and seat 
belt garnish may result, causing the 
seatback to lock into the folded down 
position.

Pull the metal tab (B) and insert it (B) 
into the buckle (B’). There will be an 
audible “click“ when the tab locks into 
the buckle. Make sure the belt is not 
twisted.

WARNING

Always have the mini metal tab (A) 
inserted into the mini buckle (A').

The seat belt should be locked into the 
buckle on each seat cushion to be prop

-

erly fastened.

1. Rear right seat belt fastening buckle
2. Rear center seat belt fastening buckle
3. Rear left seat belt fastening buckle

WARNING

Prior to fastening the rear seat belts, 
ensure the latch matches the seat belt 
buckle. Forcefully fastening the left or 
right seat belt to the center buckle can 
result in an improper fastening scenario 
that will not protect you in an accident.

OCK030024

OCK030025

OBD031022

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments