manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 407 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 407

33

6

6

What to do in an emergency

Towing

Front

Rear

Emergency towing

Front

Rear

If towing is necessary, we recommend 
you to have it done by an authorized 
Kia dealer or a commercial tow truck 
service.

If towing service is not available in an 
emergency, your vehicle may be tempo

-

rarily towed using a cable or chain 
secured to the emergency towing hook 
under the front (or rear) of the vehicle. 
Use extreme caution when towing the 
vehicle. A driver must be in the vehicle to 
steer it and operate the brakes.
Towing in this manner may be done only 
on hard-surfaced roads for a short dis

-

tance and at low speed. Also, the wheels, 
axles, power train, steering and brakes 
must all be in good condition.
僅 Do not use the tow hooks to pull a 

vehicle out of mud, sand or other con

-

ditions from which the vehicle cannot 
be driven out under its own power.

僅 Avoid towing a vehicle heavier than 

the vehicle doing the towing.

僅 The drivers of both vehicles should 

communicate with each other fre

-

quently.

OBD061013N

OBD061039

OBD061015N

OBD061040

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments