Kia FORTE 2022 Manual Download Page 400

Page: 400 / 514

What to do in an emergency

If you have a flat tire (with Tire Mobility Kit)

Components of the Tire Mobility Kit (TMK) (For 15/16 inch tire)

1. Speed restriction label
2. Sealant bottle and label with speed

restriction

3. Filling hose from sealant bottle to

wheel

4. Connectors and cable for the power

outlet direct connection

5. Holder for the sealant bottle
6. Compressor
7. On/off switch
8. Pressure gauge for displaying the tire

inflation pressure

9. Tire pressure control release button
Connectors and cable are stored in the
compressor housing.

WARNING

Expired sealant

Do not use the tire sealant after the seal

ant has expired (after the expiration
date on the sealant container). This can
increase the risk of tire failure.

ODE066039L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Search results

Summary of Contents for FORTE 2022

Reviews:

Kia FORTE 2022, Manual, Page: 400 / 514

Search results

Summary of Contents for FORTE 2022

Reviews: