manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 399 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 399

25

6

6

What to do in an emergency

If you have a flat tire (with Tire Mobility Kit)

WARNING

僅 If sealant comes into contact with 

skin, wash the affected areas thor

-

oughly. Seek medical attention if irri

-

tation develops and persists.

僅 If sealant comes into contact with the 

eyes, flush eyes with water for at least 
15 minutes. Seek medical attention if 
irritation persists.

僅 If sealant is swallowed, call a physi

-

cian or poison control center immedi

-

ately.
Exposure to the sealant for a long 
time may cause damage to the bodily 
tissues.

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments