manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 332 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 332

Driving your vehicle

122

5

Lane Following Assist (LFA)

Lane Following Assist Settings

Setting features

Turning Lane Following Assist 
ON/OFF

With the ignition switch or ENGINE 
START/STOP button in the ON position, 
press the Lane Driving Assist button 
located on the steering wheel to turn on 
Lane Following Assist. The white or 
green (

) indicator light will illuminate 

on the cluster.
Press the Lane Driving Assist button 
again to turn off the function.

Warning Volume

With the ignition switch or ENGINE 
START/STOP button in the ON position, 

select 'Driver Assistance → Warning Vol

-

ume' from the 'User Settings (LCD dis

-

play) or Setup → Vehicle (Infotainment 
System screen)' menu to change the 
Warning Volume to 'High', 'Medium' or 
'Low' for Hands-off warning.
If you change the Warning Volume, the 
Warning Volume of other Driver Assis

-

tance systems may change.

Lane Following Assist Operation

Warning and control

Lane Following Assist

If the vehicle ahead or both lane mark

-

ings are detected and your vehicle 
speed is below 180 km/h (110 mph), the 
green (

) indicator light will illuminate 

on the cluster, and the function will help 
center the vehicle in the lane by con

-

trolling the steering wheel.

CAUTION

When the steering wheel is not con

-

trolled, the green (

) indicator light will 

blink and change to white.

OBD051366

OBD041619L

OMQ4PH050379L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments