manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 330 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 330

Driving your vehicle

120

5

Navigation-based Smart Cruise Control (NSCC)

僅 If there is no destination set on the 

navigation, Highway Curve Zone Auto 
Slowdown function will operate based 
on the curve information on the main 
road.

僅 Even if you depart from the main 

road, Highway Curve Zone Auto Slow

-

down function may temporarily oper

-

ate due to navigation information of 
the highway curve section.

WARNING

僅 The navigation's speed limit informa

-

tion may differ from the actual speed 
limit information on the road. It is the 
driver's responsibility to check the 
speed limit on the actual driving road 
or lane.

僅 Highway Curve Zone Auto Slowdown 

and Set Speed Auto Change function 
will automatically cancel when you 
leave the main road of the highway. 
Always pay attention to road and driv

-

ing conditions while driving.

僅 Navigation-based Smart Cruise Con

-

trol may not operate due to the exis

-

tence of leading vehicles and the 
driving conditions of the vehicle. 
Always pay attention to road and driv

-

ing conditions while driving.

僅 When you are towing a trailer or 

another vehicle, we recommend that 
Navigation-based Smart Cruise Con

-

trol is turned off due to safety rea

-

sons.

僅 After you pass through a tollgate on a 

highway, Navigation-based Smart 
Cruise Control operates based on the 
first lane. If you enter one of the other 
lanes, Navigation-based Smart Cruise 
Control might not properly decelerate.

僅 The vehicle will accelerate if the driver 

depresses the accelerate pedal while 
Navigation-based Smart Cruise Con

-

trol is operating, and function will not 
decelerate the vehicle. However, if the 
accelerator pedal is insufficiently 
depressed, the vehicle may slow 
down.

僅 If the driver accelerates and releases 

the accelerator pedal while Naviga

-

tion-based Smart Cruise Control is 
operating, the vehicle may not decel

-

erate sufficiently or may rapidly 
decelerate to a safe speed.

僅 If the curve is too large or too small, 

Navigation-based Smart Cruise Con

-

trol may not operate.

NOTICE

僅 When the function is activated, the 

vehicle decelerates automatically 
before reaching the curved road 
according to its curvature, and the 
driving speed returns to the speed set 
by Smart Cruise Control after passing 
the curved section.

僅 The speed information on the cluster 

and navigation may differ.

僅 A time gap could occur between the 

navigation's guidance and when Navi

-

gation-based Smart Cruise Control 
operation starts and ends.

僅 Even if you are driving at a speed 

lower than Smart Cruise Control set 
speed, acceleration may be limited by 
speed cameras and curve sections 
ahead.

僅 If Navigation-based Smart Cruise 

Control is operating while leaving the 
main road to enter an interchange, 
junction, rest area, etc., the function 
may operate for a certain period of 
time.

僅 Deceleration by Navigation-based 

Smart Cruise Control may not be suf

-

ficient due to road conditions such as 

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments