manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 321 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 321

111

5

5

Driving your vehicle

Smart Cruise Control (SCC)

Smart Cruise Control disabled

When the front radar cover or sensor is 
covered with snow, rain, or foreign mat

-

ters, it can reduce the detecting perfor

-

mance and temporarily limit or disable 
Smart Cruise Control.
If this occurs, the 'Smart Cruise Control 
disabled. Radar blocked' warning mes

-

sage will appear for a certain period of 
time on the cluster.
Smart Cruise Control will operate prop

-

erly when such snow, rain or foreign 
matter is removed.

WARNING

Even though the warning message does 
not appear on the cluster, Smart Cruise 
Control may not properly operate.

CAUTION

Smart Cruise Control may not properly 
operate in an area (for example, open 
terrain), where any objects are not 
detected after turning ON the engine.

Limitations of Smart Cruise Con

-

trol

Smart Cruise Control may not operate 
properly or it may operate unexpectedly 
under the following circumstances:
僅 The detecting sensor or the surround

-

ings are contaminated or damaged

僅 Washer fluid is continuously sprayed, 

or the wiper is on

僅 The camera lens is contaminated due 

to tinted, filmed or coated windshield, 
damaged glass, or stuck of foreign 
matters (sticker, bug, etc.) on the 
glass

僅 Moisture is not removed or frozen on 

the windshield

僅 The field of view of the front view 

camera is obstructed by sun glare

僅 Street light or light from an oncoming 

vehicle is reflected on the wet road 
surface, such as a puddle in the road

僅 The temperature around the front 

view camera is high or low

僅 An object is placed on the dashboard
僅 The surrounding is very bright
僅 The surrounding is very dark, such as 

in a tunnel, etc.

僅 The brightness changes suddenly, for 

example when entering or exiting a 
tunnel

僅 The brightness outside is low, and the 

headlamps are not on or are not 
bright

僅 Driving in heavy rain or snow, or thick 

fog

僅 Driving through steam, smoke or 

shadow

僅 Only part of the vehicle is detected
僅 The vehicle in front has no tail lights, 

tail lights are located unusually, etc.

OMQ4050144L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments