Kia FORTE 2022 Manual Download Page 320

Page: 320 / 514

Driving your vehicle

110

Smart Cruise Control (SCC)

僅 When you are towing a trailer or

another vehicle, we recommend that
Smart Cruise Control is turned off due
to safety reasons.

僅 Turn off Smart Cruise Control when

your vehicle is being towed.

僅 Smart Cruise Control may not operate

properly if interfered with by strong
electromagnetic waves.

僅 Smart Cruise Control may not detect

an obstacle in front and lead to a colli

sion. Always look ahead cautiously to
prevent unexpected and sudden situ

ations from occurring.

僅 Vehicles moving in front of you with a

frequent lane change may cause a
delay in Smart Cruise Control's reac

tion or may cause Smart Cruise Con

trol to react to a vehicle actually in an
adjacent lane. Always drive cautiously
to prevent unexpected and sudden
situations from occurring.

僅 Always be aware of the surroundings

and drive safely, even though a warn

ing message does not appear or an
audible warning does not sound.

僅 If any other function’s warning mes

sage is displayed or warning sound is
generated, Smart Cruise Control
warning message may not be dis

played and warning sound may not
be generated.

僅 You may not hear the warning sound

of Forward Collision-Avoidance Assist
if the surrounding is noisy.

僅 The vehicle manufacturer is not

responsible for any traffic violation or
accidents caused by the driver.

僅 Always set the vehicle speed under

the speed limit in your state.

NOTICE

僅 Smart Cruise Control may not operate

in few seconds after the vehicle is
started or the front view camera or
front radar is initialized.

僅 You may hear a sound when the

brake is controlled by Smart Cruise
Control.

Smart Cruise Control Malfunc

tion and Limitations

Smart Cruise Control Malfunction

When Smart Cruise Control is not work

ing properly, the 'Check Smart Cruise
Control system' warning message will
appear (turns off after a certain time),

and the

warning light will illuminate

on the cluster. In this case, take your
vehicle to an authorized Kia dealer and
have the function checked.

OMQ4050145L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Search results

Summary of Contents for FORTE 2022

Reviews:

Kia FORTE 2022, Manual, Page: 320 / 514

Search results

Summary of Contents for FORTE 2022

Reviews: