manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 315 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 315

105

5

5

Driving your vehicle

Smart Cruise Control (SCC)

Driving Assist button to turn off Smart 
Cruise Control. However Manual Speed 
Limit Assist will turn on.

SCC Reaction

The sensitivity of vehicle speed when 
following the front vehicle to maintain 
the set distance can be adjusted. With 
the ignition switch or ENGINE START/
STOP button in the ON position, select 
'Driver Assistance → SCC Reaction' from 
the 'User Settings (LCD display) or Setup 

→ Vehicle (Infotainment System screen)' 

menu to set one of the three stages you 
prefer.

Warning Volume

With the ignition switch or ENGINE 
START/STOP button in the ON position, 

select 'Driver Assistance → Warning Vol

-

ume' from the 'User Settings (LCD dis

-

play) or Setup → Vehicle (Infotainment 
System screen)' menu to change the 
Warning Volume to 'High', 'Medium' or 
'Low' for Smart Cruise Control.
If you change the Warning Volume, the 
Warning Volume of other Driver Assis

-

tance systems may change.

NOTICE

If the engine is restarted, Warning Vol

-

ume will maintain the last setting.

Smart Cruise Control Operation

Operating conditions

Smart Cruise Control will operate when 
the following conditions are satisfied.

Basic function

僅 The gear is in D (Drive)
僅 The driver’s door is closed
僅 EPB (Electronic Parking Brake) is not 

applied

僅 Your vehicle speed is within the oper

-

ating speed range
10~180 km/h (5~110 mph): when 
there is no vehicle in front
0~180 km/h (0~110 mph): when there 
is a vehicle in front

僅 ESC (Electronic Stability Control), TCS 

(Traction Control System) and ABS is 
on

僅 ESC (Electronic Stability Control), TCS 

(Traction Control System) and ABS is 
not controlling the vehicle

僅 Engine rpm is not in the red zone
僅 Forward Collision-Avoidance Assist 

brake control is not operating

OBD041248L

OBD041619L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments