manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 305 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 305

95

5

5

Driving your vehicle

Driver Attention Warning (DAW)

Standby

Attentive driving

Inattentive driving

僅 The driver can monitor his/her driving 

conditions on the cluster.

- When the 'Inattentive Driving Warn

-

ing' is deselected from the settings 
menu, 'System Off' is displayed.

- The function will operate when 

vehicle speed is between 0~210 
km/h (0~130 mph).

- When vehicle speed is not within 

the operating speed, the message 
'Standby' will be displayed.

僅 The driver's attention level is dis

-

played on the scale of 1 to 5. The 
lower the level is, the more inattentive 
the driver is.

僅 The level decreases when the driver 

does not take a break for a certain 
period of time.

Taking a break

僅 The 'Consider taking a break' mes

-

sage will appear on the cluster and an 
audible warning will sound to suggest 
that the driver take a break, when the 
driver's attention level is below 1.

僅 Driver Attention Warning will not sug

-

gest a break when the total driving 
time is shorter than 10 minutes or 10 
minutes has not passed after the last 
break was suggested.

OBDM051322

OBDM041255

OBDM041256

OBD041241L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments