manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 302 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 302

Driving your vehicle

92

5

Manual Speed Limit Assist (MSLA)

Push the 

 switch to temporarily 

pause the set speed limit. The set speed 
limit will turn off but the Speed Limit 
indicator will stay on.

Resuming Manual Speed Limit 
Assist

To resume Manual Speed Limit Assist 
after the function was canceled, push 
the +, - or 

 switch.

If you push the + switch up or – switch 
down, set speed will be set to the current 
speed on the cluster. If the current speed 
of the vehicle is less than 30 km/h, the 
set speed will set as 30 km/h. If you 
push the 

 switch, vehicle speed will 

resume to the preset speed.

Turning off Manual Speed Limit 
Assist

Press the Driving Assist button to turn 
Manual Speed Limit Assist off. The 
Speed Limit indicator will go off. Always 
press the Driving Assist button to turn 
Manual Speed Limit Assist off when not 
in use.

WARNING

Take the following precautions when 
using Manual Speed Limit Assist:
僅 Always set the vehicle speed to the 

speed limit in your country.

僅 Keep Manual Speed Limit Assist off 

when the function is not in use, to 
avoid inadvertently setting a speed. 
Check that the Speed Limit indicator 
is off.

僅 Manual Speed Limit Assist does not 

substitute for proper and safe driving. 
It is the responsibility of the driver to 
always drive safely and should always 
be aware of unexpected and sudden 
situations from occurring. Pay atten

-

tion to the road conditions at all times.

OBD051021

OBDM051369

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments