manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 300 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 300

Driving your vehicle

90

5

Manual Speed Limit Assist (MSLA)

This device complies with Indus

-

try Canada licence-exempt RSS 
standard(s).

Operation is subject to the following 
conditions:
1. This device may not cause interfer

-

ence, and

2. This device must accept any interfer

-

ence, including interference that may 
cause undesired operation of the 
device.

3. Changes or modifications not 

expressly approved by the party 
responsible for compliance could void 
the user's authority to operate the 
device. 

Manual Speed Limit Assist 
(MSLA)

(1) Speed Limit indicator
(2) Set speed
You can set the speed limit when you do 
not want to drive over a specific speed.
If you drive over the preset speed limit, 
Manual Speed Limit Assist will operate 
(set speed limit will blink and chime will 
sound) until the vehicle speed returns 
within the speed limit.

Manual Speed Limit Assist Opera

-

tion

Setting the speed limit

1. Press and hold the Driving Assist but

-

ton on the steering wheel, at the 

OKA4050184

OBDM051369

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments