manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 295 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 295

85

5

5

Driving your vehicle

Blind-Spot Collision-Avoidance Assist (BCA)

Stopping vehicle and ending 
brake control

僅 When the vehicle is stopped due to 

emergency braking, the ‘Drive care

-

fully’ warning message will appear on 
the cluster.

僅 For your safety, the driver should 

depress the brake pedal immediately 
and check the surroundings.

僅 Brake control will end after the vehicle 

is stopped by emergency braking for 
approximately 2 seconds.

WARNING

僅 For your safety, change the settings 

after parking the vehicle at a safe 
location.

僅 If any other function’s warning mes

-

sage is displayed or audible warning 
is generated, Blind-Spot Collision-
Avoidance Assist’s warning message 
may not be displayed and audible 
warning may not be generated.

僅 You may not hear the warning sound 

of Blind-Spot Collision-Avoidance 
Assist if the surrounding is noisy.

僅 Blind-Spot Collision-Avoidance Assist 

may not operate if the driver applies 
the brake pedal to avoid collision.

僅 When Blind-Spot Collision-Avoidance 

Assist is operating, braking control by 

the function will automatically cancel 
when the driver excessively depresses 
the accelerator pedal or sharply steers 
the vehicle.

僅 If changing the gear quickly during 

reversing the vehicle, Blind-Spot Colli

-

sion-Avoidance Assist may not work 
or may operate unnecessarily.

僅 During Blind-Spot Collision-Avoidance 

Assist operation, the vehicle may stop 
suddenly injuring passengers and 
shifting loose objects. Always have the 
seat belt on and keep loose objects 
secured.

僅 Even if there is a problem with Blind-

Spot Collision-Avoidance Assist, the 
vehicle’s basic braking performance 
will operate properly.

僅 Blind-Spot Collision-Avoidance Assist 

does not operate in all situations or 
cannot avoid all collisions.

僅 Blind-Spot Collision-Avoidance Assist 

may warn the driver late or may not 
warn the driver depending on the 
road and driving conditions.

僅 Driver should maintain control of the 

vehicle at all times. Do not depend on 
Blind-Spot Collision-Avoidance Assist. 
Maintain a safe braking distance, and 
if necessary, depress the brake pedal 
to reduce driving speed or to stop the 
vehicle.

僅 Never test Blind-Spot Collision-Avoid

-

ance Assist on people, animal, objects, 
etc. It may cause serious injury or 
death.

WARNING

The brake control may not operate 
properly depending on the status of ESC 
(Electronic Stability Control).
There will only be a warning when:

OBD041233L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments