manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 285 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 285

75

5

5

Driving your vehicle

Lane Keeping Assist (LKA)

Warning Volume

With the ignition switch or ENGINE 
START/STOP button in the ON position, 
select 'Driver Assistance → Warning Vol

-

ume' from the 'User Settings (LCD dis

-

play) or Setup → Vehicle (Infotainment 
System screen)' menu to change the 
Warning Volume to 'High', 'Medium' or 
'Low' for Lane Keeping Assist.
If you change the Warning Volume, the 
Warning Volume of other Driver Assis

-

tance systems may be changed.

Lane Keeping Assist Operation

Warning and control

Lane Keeping Assist will warn and con

-

trol the vehicle with Lane Departure 
Warning and Lane Keeping Assist.

Lane Departure Warning

Left

Right

僅 To warn the driver that the vehicle is 

departing from the projected lane in 
front, the green (

) indicator 

light will blink on the cluster, the lane 
line will blink on the cluster depending 
on which direction the vehicle is veer

-

ing, and an audible warning will 
sound.

僅 Lane Keeping Assist will operate when 

your vehicle speed is between 
approximately 60~200 km/h (40~120 
mph).

OBD041619L

OBD041263

OBD041266

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments