manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 283 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 283

73

5

5

Driving your vehicle

Lane Keeping Assist (LKA)

the vehicle is started, or the front view 
camera is initialized.

This device complies with Indus

-

try Canada licence-exempt RSS 
standard(s).

Operation is subject to the following 
conditions:
1. This device may not cause interfer

-

ence, and

2. This device must accept any interfer

-

ence, including interference that may 
cause undesired operation of the 
device.

3. Changes or modifications not 

expressly approved by the party 
responsible for compliance could void 
the user's authority to operate the 
device. 

Lane Keeping Assist (LKA)

Lane Keeping Assist is designed to help 
detect the lane markers while driving 
over a certain speed. Lane Keeping 
Assist will warn the driver if the vehicle 
leaves the lane without using the turn 
signal, or will automatically assist the 
driver’s steering to help prevent the 
vehicle from departing the lane.

Detecting sensor

[1]: Front view camera
The front view camera is used as a 
detecting sensor to detect lane mark

-

ings.
Refer to the picture above for the 
detailed location of the detecting sensor.

CAUTION

For more details on the precautions of 
the front view camera, refer to "Forward 
Collision-Avoidance Assist (FCA) (Sen

-

sor fusion) (if equipped)" on page 5-61.

OBD051015N

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments