manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 282 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 282

Driving your vehicle

72

5

Forward Collision-Avoidance Assist (FCA) (Sensor fusion)

speed in order to maintain a safe dis

-

tance.

[A]: Your vehicle
[B]: Lane changing vehicle
[C]: Same lane vehicle
When driving in stop-and-go traffic, 
and a stopped vehicle in front of you 
merges out of the lane, Forward Colli

-

sion-Avoidance Assist may not imme

-

diately detect the new vehicle that is 
now in front of you. In this case, you 
must maintain a safe braking dis

-

tance, and if necessary, depress the 
brake pedal to reduce your driving 
speed in order to maintain a safe dis

-

tance.

僅

Recognizing the vehicle

When the vehicle in front has heavy 
loading extended rearward, or when 
the vehicle in front has higher ground 
clearance, it may induce a hazardous 
situation. Always pay attention to road 
and driving conditions, while driving 
and, if necessary, depress the brake 
pedal to reduce your driving speed in 
order to maintain distance.

WARNING

僅 When you are towing a trailer or 

another vehicle, we recommend that 
Forward Collision-Avoidance Assist is 
turned off due to safety reasons.

僅 Forward Collision-Avoidance Assist 

may operate if objects that are similar 
in shape or characteristics to vehicles, 
pedestrians or cyclists are detected.

僅 Forward Collision-Avoidance Assist 

does not operate on bicycles, motor

-

cycles, or smaller wheeled objects, 
such as luggage bags, shopping carts, 
or strollers that are dragged by a 
pedestrian or a cyclist.

僅 Forward Collision-Avoidance Assist 

may not operate properly if interfered 
by strong electromagnetic waves.

僅 Forward Collision-Avoidance Assist 

may not operate for 15 seconds after 

OADAS031SDY

OBD051365

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments