manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 281 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 281

71

5

5

Driving your vehicle

Forward Collision-Avoidance Assist (FCA) (Sensor fusion)

僅

Driving on a sloped road

Forward Collision-Avoidance Assist 
may not detect other vehicle, pedes

-

trian or cyclist in front while driving 
uphill or downhill and this may result 
in no warning, or braking assist when 
necessary.

When the function suddenly recog

-

nizes the vehicle, pedestrian or cyclist 
in front while passing over a slope, 
you may experience sharp decelera

-

tion.
Always keep your eyes forward while 
driving upward or downward on a 
slope, and, if necessary, depress the 
brake pedal to reduce your driving 
speed in order to maintain distance.

僅

Changing lanes

[A]: Your vehicle
[B]: Lane changing vehicle
When a vehicle changes lanes in front 
of you, Forward Collision-Avoidance 
Assist may not immediately detect the 
vehicle, especially if the vehicle 
changes lanes abruptly. In this case, 
you must maintain a safe braking dis

-

tance, and if necessary, depress the 
brake pedal to reduce your driving 

ODEEV069243NR

ODEEV069244NR

ODEEV069245NR

OADAS030SDY

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments