manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 271 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 271

61

5

5

Driving your vehicle

Forward Collision-Avoidance Assist (FCA) (Sensor fusion)

or when the vehicle in front of you has 
higher ground clearance, additional 
special attention is required. Forward 
Collision-Avoidance Assist may not be 
able to detect the cargo extending 
from the vehicle. In these instances, 
you must maintain a safe braking dis

-

tance from the rearmost object, and if 
necessary, steer your vehicle and 
depress the brake pedal to reduce 
your driving speed in order to main

-

tain distance.

WARNING

僅 When you are towing a trailer or 

another vehicle, we recommend that 
Forward Collision-Avoidance Assist is 
turned off due to safety reasons.

僅 Forward Collision-Avoidance Assist 

may operate if objects that are similar 
in shape or characteristics to vehicles 
and pedestrians are detected.

僅 Forward Collision-Avoidance Assist 

does not operate on bicycles, motor

-

cycles, or smaller wheeled objects, 
such as luggage bags, shopping carts, 
or strollers that are dragged by a 
pedestrian.

僅 Forward Collision-Avoidance Assist 

may not operate properly if interfered 
with by strong electromagnetic 
waves.

僅 Forward Collision-Avoidance Assist 

may not operate for approximately 15 
seconds after the vehicle is started, or 
the front view camera is initialized.

Forward Collision-Avoidance 
Assist (FCA) (Sensor fusion) (if 
equipped)

Forward Collision-Avoidance Assist is 
designed to help detect and monitor the 
vehicle ahead or help detect a pedes

-

trian or cyclist in the roadway and warn 
the driver that a collision is imminent 
with a warning message, audible warn

-

ing and apply emergency braking.

Detecting sensor

OBD051362

OBD051015N

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments