manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 255 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 255

45

5

5

Driving your vehicle

Brake system

the ESC indicator light is blinking, or 
when the road surface is slippery.

ESC OFF usage

When driving

僅 ESC should be turned on for daily 

driving whenever possible.

僅 To turn ESC off while driving, press 

the ESC OFF button while driving on a 
flat road surface.

Never press the ESC OFF button while 
ESC is operating (ESC indicator light 
blinks).
If ESC is turned off while ESC is operat

-

ing, the vehicle may slip out of control.

NOTICE

僅 When operating the vehicle on a 

dynamometer, ensure that the ESC is 
turned off (ESC OFF light illuminated).

僅 Turning the ESC off does not affect 

ABS or brake system operation.

WARNING

Never press the ESC OFF button while 
ESC is operating.
If the ESC is turned off while ESC is oper

-

ating, the vehicle may go out of control.
To turn ESC off while driving, press the 
ESC OFF button while driving on a flat 
road surface.

Hill-start assist control (HAC)

Hill start Assist Control is a comfort func

-

tion. The main intend is to prevent the 
vehicle from rolling backwards while 
driving off uphill on an inclined surface. 
HAC holds the braking pressure builtup 
by driver during stopping procedure for 
2 seconds after releasing brake pedal.

During the pressure-hold period, the 
driver has enough time to depress the 
accelerator pedal to drive off.
The braking pressure is reduced as soon 
as the system detects the driver’s inten

-

tion to drive off.

WARNING

The HAC is usually activated only for 2 
seconds. The driver should be careful 
from the rolling backward causing the 
accident with behind objects or human, 
when the driver may feel the unintended 
rolling backward while driving off on hill 
due to insufficient brake hold pressure 
built-up by driver during stopping pro

-

cedure.

NOTICE

僅 The HAC does not operate when the 

transmission shift lever is in the P 
(Park) or N (Neutral) position.

僅 The HAC activates even though the 

ESC is off but it does not activate 
when the ESC has malfunctioned.

Vehicle stability management 
(VSM)

This system provides further enhance

-

ments to vehicle stability and steering 
responses when a vehicle is driving on a 
slippery road or a vehicle detected 
changes in coefficient of friction 
between right wheels and left wheels 
when braking.

VSM operation

When the VSM is in operation, ESC indi

-

cator light (

) blinks.

When the vehicle stability management 
is operating properly, you can feel a 
slight pulsation in the vehicle. This is 

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments