manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 247 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 247

37

5

5

Driving your vehicle

Brake system

is released automatically. Make sure 
the brake warning light goes off.

5. If the shift lever is in N (Neutral), 

depress the brake pedal and shift out 
of N (Neutral) to R (Rear) or D (Drive), 
the EPB is released automatically. 
Make sure the brake warning light 
goes off.
僅 If you try to drive off depressing the 

accelerator pedal with the EPB 
applied, but doesn't release auto

-

matically, a warning will sound 
once and a message will appear.

僅 If the driver's seat belt is not fas

-

tened, driver’s door is opened, the 
engine hood is opened in D or the 
liftgate is opened in R, a warning 
will sound once and a message will 
appear.

僅 If there is a problem with the vehi

-

cle, a warning may sound once and 
a message may appear. If the 
above situation occurs, depress the 
brake pedal and release EPB by 
pressing the EPB switch.

WARNING

僅 Never allow anyone who is unfamiliar 

with the vehicle to touch the parking 
brake. If the parking brake is released 
unintentionally, serious injury may 
occur.

僅 Do not place any objects around the 

EPB switch. They could release the 
EPB switch.

CAUTION

僅 To prevent unintentional movement 

when stopped and leaving the vehicle, 
do not use the shift lever in place of 
the parking brake. Set the parking 
brake and make sure the shift lever is 
securely positioned in P (Park). Use 
wheel chock if necessary.

僅 In winter or cold conditions, the EPB 

may freeze. Park an vehicle with the 
shift lever in P on an even and safe 
place without applying the EPB. And 
use wheel chock.

僅 Do not drive your vehicle with the EPB 

applied. It may cause excessive wear 
of brake pad and brake rotor.

僅 A click sound may be heard while 

operating or releasing the EPB, but 
these conditions are normal and indi

-

cate that the EPB is functioning prop

-

erly.

僅 When leaving your keys with a park

-

ing lot attendant or valet, make sure 
to inform him/her how to operate the 
EPB.

僅 When the battery is drained, the EPB 

does not apply or release. In this case, 
jump start your vehicle.

OMQ4AH050049

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments