manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 222 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 222

Driving your vehicle

12

5

ENGINE START/STOP button

START/STOP button without the shift 
lever in the P (Park) position, the 
ENGINE START/STOP button will not 
change to the OFF position but to the 
ACC position.

Vehicles equipped with anti-theft 
steering column lock

The steering wheel locks when the 
ENGINE START/STOP button is in the 
OFF position to protect you against 
theft. It locks when the door is opened.
If the steering wheel is not locked prop

-

erly when you open the driver's door, the 
warning chime will sound. Try locking 
the steering wheel again. If the problem 
is not solved, have the system checked 
by an authorized Kia dealer.
In addition, if the ENGINE START/STOP 
button is in the OFF position after the 
driver's door is opened, the steering 
wheel will not lock and the warning 
chime will sound. In such a situation, 
close the door. Then the steering wheel 
will lock and the warning chime will stop.

NOTICE

If the steering wheel doesn't unlock 
properly, the ENGINE START/STOP but

-

ton will not work. Press the ENGINE 
START/STOP button while turning the 
steering wheel right and left to release 
the tension.

NOTICE

You are able to turn off the engine 
(START/RUN) or vehicle power (ON), 
only when the vehicle is not in motion.

CAUTION

In an emergency situation while the 
vehicle is in motion, you are able to turn 

the engine off and to the ACC position 
by pressing the ENGINE START/STOP 
button for more than 2 seconds or 3 
times successively within 3 seconds.
If the vehicle is still moving, to restart the 
vehicle:
僅 Manual Transmission - Press the 

ENGINE START/STOP button with 
shift ever in neutral and clutch pedal 
depressed.

僅 Dual Clutch Transmission/Intelligent 

Variable Transmission - Press the 
ENGINE START/STOP button when 
vehicle speed is 5 km/h or over.

ACC (Accessory)

With Manual Transmission

Press the ENGINE START/STOP button 
when the button is in the OFF position 
without depressing the clutch pedal.

With Dual Clutch Transmission/
Intelligent Variable Transmission

Press the ENGINE START/STOP button 
while it is in the OFF position without 
depressing the brake pedal.
The steering wheel unlocks and electri

-

cal accessories are operational.

OMQ4050294L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments