manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 205 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 205

129

4

4

Features of your vehicle

Interior features

WARNING

Avoid eye injury. DO NOT overstretch 
the luggage net, ALWAYS keep your 
face and body out of the luggage net's 
recoil path. DO NOT use when the strap 
has visible signs of wear or damage.

Cargo area cover

Use the cover to hide items stored in the 
cargo area.The cargo area cover will be 
lifted when the liftgate is opened. Dis

-

connect the strap (1) from holder if you 
want to return the cover to original posi

-

tion. To remove the cargo area cover 
completely, lift the cover to a 43- degree 
angle and pull it out to the full (2). For 
installation of the cover, reverse the 
removal procedure.

CAUTION

僅 When you return the cargo area cover 

to its original position, hold the cover 
and lower it.

僅 Do not operate the vehicle with the 

cover removed. It may damage to the 
cover.

僅 The cargo area cover may be lifted 

when the liftgate is opened. Ensure 
that the luggage on the cover is 
moved to a safe place.

僅 Since the cargo area cover may be 

damaged or malformed, do not apply 
excessive force to the cover or do not 
put the heavy loads on it.

WARNING

僅 Do not place objects on the cargo 

area cover while driving. Such objects 
may be thrown about inside the vehi

-

cle and possibly injure vehicle occu

-

pants during an accident or when 
braking.

僅 Never allow anyone to ride in the lug

-

gage compartment. It is designed for 
luggage only.

僅 Maintain the balance of the vehicle 

and locate the weight as far forward 
as possible.

Shopping bag holder (if 
equipped)

CAUTION

僅 Do not hang a bag weighing more 

than 3 kg (7 lbs.). It may cause dam

-

age to the shopping bag holder.

僅 Do not hang the frail objects when 

you drive rough road, the objects may 
be damaged.

OBD041423L

OBD041424L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments