manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 195 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 195

119

4

4

Features of your vehicle

Storage compartment

Sliding armrest (if equipped)

To move forward

Grab the front portion of the armrest 
then press up the lever (1) and pull it for

-

ward.

To move rearward

Push the armrest rearward with your 
palm.

WARNING

Do not grab the front portion of the arm

-

rest (1) when moving the armrest rear

-

ward. It may pinch your fingers.

Glove box

To open the glove box:

僅 Pull the handle and the glove box will 

automatically open.

Close the glove box after use.

WARNING

Glove box

To reduce the risk of injury in an acci

-

dent or sudden stop, always keep the 
glove box door closed while driving.

CAUTION

Do not keep food in the glove box for a 
long time.

Sunglass holder

To open the sunglass holder, press the 
cover and the holder will slowly open. 
Place your sunglasses with the lenses 
facing out. To close the sunglass holder, 
push it up.

WARNING

僅 Do not keep objects except sun

-

glasses inside the sunglass holder. 
Such objects can be thrown from the 
holder in the event of a sudden stop 
or an accident, possibly injuring the 
passengers in the vehicle.

僅 Do not open the sunglass holder while 

the vehicle is moving. The rear view 

OBD041549L

OBD041017L

OBD041018L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments