manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 185 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 185

109

4

4

Features of your vehicle

Automatic climate control system

Mode selection

The mode selection button controls the 
direction of the air flow through the ven

-

tilation system.

The air flow outlet ports are switched in 
the following sequence:

Face-Level (B, D, F)

Air flow is directed toward the upper 
body and face. Additionally, each outlet 
can be controlled to direct the air dis

-

charged from the outlet.

Bi-Level (B, C, D, E, F)

Air flow is directed towards the face and 
the floor.

Floor-Level (A, C, D, E, F)

Most of the air flow is directed to the 
floor, with a small amount of the air 
being directed to the windshield, side 
window defrosters and side air vents.

Floor/Defrost-Level (A, C, D, E, F)

Most of the air flow is directed to the 
floor and the windshield with a small 
amount directed to the side window 
defrosters and side air vents.

Defrost mode

When you select the defrost mode, the 
following system settings will be made 
automatically:
僅 The air conditioning system will be 

turned on.

僅 The outside (fresh) air position will be 

selected.

僅 The fan speed will be set to the high 

speed.

To turn the defrost mode off, press the 
mode button or defrost button again or 
AUTO button.

Instrument panel vents

Type A

OBD041314N

OBD041315N

OBD041305L

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments