manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 179 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 179

103

4

4

Features of your vehicle

Manual climate control system

僅 Type A
The outlet vents can be opened or 
closed separately using the thumbwheel. 
To close the vent, rotate it downward to 
the maximum position. Also, you can 
adjust the direction of air delivery from 
these vents using the vent control lever 
as shown.

僅 Type B
The outlet vents can be opened or 
closed separately turning the knob right 
or left. Also, you can adjust the direction 
of air delivery from these vents moving 
the knob freely to any directions.

Temperature control

The temperature control knob allows 
you to control the temperature of the air 
flowing from the ventilation system.

To change the air temperature in the 
passenger compartment, turn the knob 
to the right for warm and hot air or to 
the left for cooler air.

Controlling air intake

The air intake control is used to select 
the outside (fresh) air position or recircu

-

lated air position.

To change the air intake control position.
僅 Push the desired control button

OBD041309L

OBD041306L

OBD041307N

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments