Kia FORTE 2022 Manual Download Page 171

Page: 171 / 514

Features of your vehicle

Interior lights

- To turn off the DOOR mode, press

the DOOR button (2) once again
(not pressed).

僅

(3): Press this switch to turn the

front map lamps on.

僅

(4): Press this switch to turn the

front map lamps off.

NOTICE

The DOOR mode and ROOM mode can
not be selected at the same time.

Room lamp

Type A

Type B (if equipped)

僅

: The light stays on at all times.

Liftgate room lamp

The liftgate room lamp comes on when
the liftgate is opened.

CAUTION

The liftgate room lamp comes on as long
as the liftgate opens. To prevent unnec

essary charging system drain, close the
liftgate securely after using the liftgate
room.

Vanity mirror lamp (if equipped)

僅

: The lamp will turn on if this but

ton is pressed.

僅

: The lamp will turn off if this but

ton is pressed.

OSKEV048007NR

OSK3048007NR

OBD041420L

ODEEV068157NR

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Search results

Summary of Contents for FORTE 2022

Reviews:

Kia FORTE 2022, Manual, Page: 171 / 514

Search results

Summary of Contents for FORTE 2022

Reviews: