manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 162 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 162

Features of your vehicle

86

4

Lighting

Lighting control

The light switch has a headlight and a 
position lamp position.

To operate the lights, turn the knob at 
the end of the control lever to one of the 
following positions:
1. OFF position
2. Auto light position
3. Position & Tail light
4. Headlight position

Position & Tail light 

When the light switch is in the position 
lamp position, the front position lamp 
and, tail, license light will turn ON.

Headlight 

When the light switch is in the head light 
position, The head, tail, position, license 
and instrument panel lights will turn ON.

NOTICE

The ignition switch or the ENGINE 
START/STOP button must be in the ON 
position to turn on the headlights.

Auto light

When the light switch is in the AUTO 
light position, the taillights and head

-

lights will turn ON or OFF automatically 
depending on the amount of light out

-

side the vehicle.

OSP2049032

OSP2049034

OSP2049035

OBDM041651

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments