manualshive.com logo in svg

Kia FORTE 2022, Manual, Page: 153 / 514

Share
Download
Kia FORTE 2022 Manual Download Page 153

77

4

4

Features of your vehicle

Warning and indicator lights

Immobilizer Indicator Light (With 
Smart Key) 

This indicator light illuminates for 
up to 30 seconds:

僅 When the vehicle detects the smart 

key in the vehicle properly while the 
ENGINE START/STOP button is ACC 
or ON.
- At this time, you can start the 

engine.

- The indicator light goes off after 

starting the engine.

This indicator light blinks for a 
few seconds:

僅 When the smart key is not in the vehi

-

cle.
- At this time, you can not start the 

engine.

This indicator light illuminates for 
2 seconds and goes off:

僅 When the vehicle can not detect the 

smart key which is in the vehicle while 
the ENGINE START/STOP button is 
ON.
In this case, have your vehicle 
inspected by an authorized Kia dealer.

This indicator light blinks:

僅 When the battery of the smart key is 

weak.
- At this time, you can not start the 

engine. However, you can start the 
engine if you press the ENGINE 
START/STOP button with the smart 
key. (For more details, refer to 
"Folding key immobilizer system" 
on page 4-14).

僅 When there is a malfunction with the 

immobilizer system.

In this case, have your vehicle 
inspected by an authorized Kia dealer.

Turn signal indicator light 

This indicator light blinks:

僅 When you turn the turn signal light on.

- If any of the following occurs, there 

may a malfunction with the turn 
signal system.
In this case, have your vehicle 
inspected by an authorized Kia 
dealer.

僅 The indicator light does not blink but 

illuminates.

僅 The indicator light blinks more rapidly.
僅 The indicator light does not illuminate 

at all.

Low beam indicator light 

This indicator light illuminates:

僅 When the headlights are on.

High beam indicator light 

This indicator light illuminates:

僅 When the headlights are on and in the 

high beam position.

僅 When the turn signal lever is pulled 

into the Flash-to-Pass position.

High Beam Assist indicator 

This warning light illuminates :

僅 When the high beam is on with the 

light switch in the AUTO light position.

僅 If your vehicle detects oncoming or 

preceding vehicles, High Beam Assist 

Summary of Contents for FORTE 2022



































































































































































































































































































































































































































































































































Reviews:

No comments